S U B - G R O U P S P A N E L
page 40
D-12 / June 2006
Sub-Groups Panel (GRP-D12)
Controls and Functions
The D-12 digital audio control surface is equipped with one SUB-GROUPS
Panel. This panel houses eight sub-group outputs.
Each sub-group has identical set of controls: SET,
ON, and AFL buttons, and MSTR and DCA assign
displays.
Output Destinations, Sub-Group 1
Example
Press a groups’s SET switch to access centralized
controls associated with the group. Central controls
include PAN/BAL, MODE, EQ, Dynamics, Test
Tone assign, and Routing. The group may be in
Surround Mode (if configured as a surround group),
Stereo, LEFT, RIGHT, or MONO modes. The group
MODE settings affects the group output but does not
affect the group signal as assigned to masters.
The DESTINATION display (XYE-D12 panel)
will show the most recent
output destination assigned.
It should be noted, however,
that a mix channel can go to
multiple destinations, and for
this reason the entire list of
destinations that channel is
assigned to is displayed in the
LCD display when that channel’s SET button is
active. If the mix is not assigned anywhere the
display will show “NoDest”.
XYE-D12 Panel
