I N P U T P A N E L
page 9
D-12 / July 2006
On the D-12 control surface the average value column has been set to VU
timing characteristics. In addition, a bright yellow rectangle will light at
the top of the column if digital “OVER” or clipping is detected.
Nominal Level 0dB = +4dBu analog and -20dBFS digital.
Selected Source
The currently selected source name shows on the Channel Status LCD
display underneath the channel description. This name is the 8-character
name as defined in the Wheatstone Bridge Router configuration.
Preset Source
The currently loaded preset source name shows on the Channel Status
LCD display underneath the AUX SEND information. Once again, this
8-character name is as defined in the Wheatstone Bridge Router.
Channel Status
Various indicators on the Channel Status LCD display will show status
information for the associated channel. Above the level bargraph the
words “ON”, “OFF”, “ON AIR”, or “MUTING” will appear as the
channel status changes. “MUTING” indicates that the channel is turned
ON and has a mute set. “ON AIR” indicates that the channel is ON and the
fader is up. The letters “EQ” will show in the Input Level display if
equalizer functions are active for the channel, and “GR” will appear if
signal dynamics functions (compression, limiting) are engaged.
Channel Number
A large white number shows under the GR meter on the Input Level
display to indicate the channel number.
