![background image](http://html1.mh-extra.com/html/westomatic/easy-6000/easy-6000_operator-and-installation-manual_965969036.webp)
EASY 6000
– Issue 02
35
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI)
– tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: [email protected]
E
N
G
L
I
S
H
9.2.1
PRODUCT FILLING, SMART MODE
(SEE COMMAND 51)
The product filling date is stored with this refilling mode; the machine is therefore able to
recognize an expired product.
To operate correctly it is necessary to enter the date, time and no. of days to expiry (see
commands 71-78).
a)
Open the door.
b)
Press the TEST button on the main control board located in the coin box compartment. The display will
display the message "Select the drum to refill".
c)
Close the door again and press the selection button corresponding to the drum to refill. The vending
machine will identify the empty compartment or the one containing an expired product. This compartment
will move to the sales position and the corresponding delivery door will open to allow the insertion or
substitution of the product. The number of the compartment accessible in this moment appears on the
display and the price set for this compartment will be displayed.
d)
After entering the new product, press the ENTER button to record the presence of the product in the
compartment and set the expiry time, after which the sale of the product will be inhibited. If no product is
inserted, press the corresponding selection button to pass to the next compartment. The procedure will
continue until all the compartments have been recorded or another drum is chosen for refilling. The
vending machine will pass automatically from the refilling mode to normal mode after analyzing all the
drums. To abandon the refilling mode at any time, press the TEST button, page 15.
e)
When you refill a Fifo selection, every compartment must be reloaded in successive order without leaving
gaps. If you do not have enough products to fill a Fifo selection: press the ENTER button after loading the last
product and then abandon refilling (press the TEST button) or select the next drum to refill.
9.3
PRODUCT SALES OPERATIONS
After filling according to the instructions, after setting the sales prices, having filled the change tubes (if the
vending machine has a coin mechanism with change tubes) and after checking that the message "Vending
machine in operation ...", the machine is ready to sell.
Rotate the drums by pressing the shopper buttons (see point 5, fig. 1) to bring the product to purchase to the
sale position.
Press the selection button (see point 1, fig. 1) corresponding to the desired product.
Check the cost of the product on the display.
Put in the money.
Confirm the choice of product by pressing the associated selection button.
Take the product from the compartment which opens automatically.
Содержание Easy 6000
Страница 1: ......