![background image](http://html1.mh-extra.com/html/westomatic/easy-6000/easy-6000_operator-and-installation-manual_965969023.webp)
22
EASY 6000
– Issue 02
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI)
– tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: [email protected]
E
N
G
L
I
S
H
Command 58 Price configuration:
In response to this command, a number that corresponds to the subdivision of the prices for each drum is
displayed. The following possibilities are available:
a) 1 price: the value to set is 1 which corresponds to associating prices 1-8 to drums 1-8.
b) 2 prices: the value to set is 2; every drum is subdivided into two halves to which different prices can
correspond. The first half of each drum makes reference to prices 1-8 while the second half of each dish
makes reference to prices 9-16. In other words, the price 9 corresponds to the second half of drum 1, while
price 10 refers to the second half of drum 2, etc.
c) 3 prices: the value to set is 3. Every drum is divided into 3 sections, each of which makes reference to a
different price. Prices 1-8 are associated with the first section of the drum 1-8; prices 9-16 to the second
section, and 17-24 to the last section.
If, for example, you want to set two different prices for each of the 8 drums, proceed as follows:
1.
Programming mode, the display will show Command 00
2.
Enter 58 and press ENTER, the display will show the current value of the parameter NN
3.
Set value 2 and press ENTER.
Command 59 Option for access to all the compartments:
This option is only effective during smart refilling. If "0" is set, the machine presents all the empty
compartments, or those containing expired products to the filler.
If the command is set at "1", on the other hand, and if the sell-by date of the drum is set at "99", the machine
makes all the compartments available to the filler indifferently.
Command 60 Erases the memory:
Activation of this command cancels all the data programmed by the user and the
new default parameters determined by the manufacturer are automatically set.
In response to this command the screen displays
Code 0000
. Enter the figure 6203 then press the ENTER
key to cancel al the data stored in the vending machine's memory. The procedure to cancel the data from the
memory is as follows:
Programming mode, ............................................................................. Command 0 appears on the display
Type 60 and press ENTER, .................................................................. Code 0000 appears on the display
Type 6203 and press ENTER, .................................................... 'memory cleared' appears on the display
Note: To exit from the command press the button on the VMC board once.
Command 61 Reset security/access code:
This command makes it possible to reset the access code used in the EVA_DTS protocol.
Command 62 Enable discount:
The following discount types can be enabled depending on the value set in this parameter:
0 = no type of discount.
1 = discount for different time slots.
2 = discount for purchases with key /credit card (only possible in MDB mode).
3 = discount for time slots and for purchases with key /credit card (only possible in MDB mode).
N.B.
Enter the values of the desired time slots in daily timer 2 in order to enable the application of the
discount.
For machines with the cashless system this command makes it possible to apply different price tables. The
selection of the table to be applied at the time of sale occurs automatically through the communication
protocol between machine and reader (only possible for MDB cashless systems which are provided with this
option).
Command 63 Set the mono/multivend:
If the command is set at 0, the default value, the vending machine operates in monovend mode, and in cash
mode the surplus credit is returned. If this is not possible the sum is added to the amount totalled due to
overpricing. Vice versa, if the command is set at 1, the vending machine operates in multivend mode, and the
amount which exceeds the cost, after the sale, is displayed once again and can be recovered by simply
pressing the coin return button or used for a new selection.
Nex
t you have the option of selecting whether or not to keep the overpay at the user‟s disposal for an
indefinite period of time. 1= function enabled , 0 = function disabled.
Содержание Easy 6000
Страница 1: ......