![background image](http://html1.mh-extra.com/html/westomatic/easy-6000/easy-6000_operator-and-installation-manual_965969019.webp)
18
EASY 6000
– Issue 02
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI)
– tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: [email protected]
E
N
G
L
I
S
H
Compartment layout if the drums are divided into 2 sections.
4 Compts
6
Compts
8
Compts
12
Compts
16
Compts
24
Compts
48
Compts
Sect 1
1-2
1-3
1-4
1-6
1-8
1-12
1-24
Sect 2
3-4
4-6
5-8
7-12
9-16
13-24
25-48
Compartment layout if the drums are divided into 3 sections.
4 Compts
6 Compts 8 Compts
12
Compts
16
Compts
24
Compts
48
Compts
Sect 1
1
1-2
1-3
1-4
1-6
1-8
1-16
Sect 2
2
3-4
4-6
5-8
7-11
9-16
17-32
Sect 3
3-4
5-6
7-8
9-12
12-16
17-24
33-48
Command 04 Discount price setting submenu:
This command has the same functions as command 03 except that this command sets the discounted
prices.
Command 05 Setting references to the prices:
This command is used exclusively when you set the prices in the coin mechanism.
Type 05 and press ENTER to go to the price reference setting submenu; "Drum number 00" will appear on
the display.
This submenu makes it possible to associate a price number with each selection. Enter the code that
identifies the selection and press ENTER: the number of the price associated with the chosen selection will
appear on the display. Enter the new price you wish to associate with the selection and press ENTER to save
it, or press A to return to the submenu and leave the previous value unchanged. Then repeat the procedure
for another selection or return to the main menu by pressing the ESC button.
N.B.: This command is not available with MULTIPRICE (Command 58 with 2 or 3).
Command 06 Setting the product code and product capacity:
This command makes it possible to associate an 8-figure product code with each selection.
MULTIPRICE
If command 58 is set at 2 (2 prices for each drum) or 3 (3 prices for each drum) the machine
works by price line and therefore the programming procedure is the following:
For example, proceed as follows if you want to associate a product code to price line 10 (products contained
in section 2 of drum 2):
1 Programming mode, the display will show Command 00
2 Enter 06 and press ENTER, the display will show Price number 00
3 Enter 10 and press ENTER, the display will show Product number 0000
4 Enter the desired code and press ENTER.**
**At this point, the machine asks you to program the maximum number of products that this given drum can
contain, or for that given price line. Specify the value and confirm with the ENTER key.
Command 07 Display sales per full price selection:
With this command you can access the submenu for displaying the number of sales per selection at the full
price; "Drum number 00" will appear on the display. Enter the code which identifies the selection for which
you want to know the sales figures and press the ENTER key; the requested value will appear on the display.
When you press the ESC key, you return to the submenu from which you can display the number of sales for
another selection by repeating the above-mentioned procedure, or return the main menu by pressing the ESC
key a second time.
Содержание Easy 6000
Страница 1: ......