28
EASY 6000
– Issue 02
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI)
– tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: [email protected]
E
N
G
L
I
S
H
8.3
SUBMENU FOR SETTING THE CLOCK & DAILY EVENT
TIMERS
(SEE COMMAND 02)
Alarm set 01 Sets the year/month/day:
This command is used to set the year, month and day on the clock in the control board. The introduction
format is YYMMDD.
Alarm set 02 Sets the hour and minute:
This command is used to set the clock on the control board. Enter the correct hour and minute values and
press ENTER to memorise it. Then, enter 1 to have the clock appear on the display, otherwise enter 0.
Alarm set 03 Setting the days of the week:
This command is used to set the day on the clock which is present on the control board; the permissible
values are from 1 (Monday) to 7 (Sunday).
Alarm 10 Lighting control setting:
Use this control to set the lighting all off = 0 or, dimming of the lighting = 1 during the energy saving time slots
(see Alarm 11). The system then offers the option of switching off the LED when the door is open, 1 =
enabled, 0 = not enabled.
Alarm 11 Lights on/off:
With this command 3 daily periods can be programmed for switching the lighting on and off. However, even
in the periods when the lighting is programmed off, simply pressing a button on the keyboard or inserting
money will activate the lighting for a period of 3' for the vend cycle to take place. If this function is not
required, program 2400 in
Alarm 11
.
Alarm 21 Setting discount time slots:
With this command you can program 3 daily discount time slots. In the time slots with the discount active the
machine refers to the prices set in the submenu relevant to the discounted prices. Naturally command 62 in
the main menu must be set at 1. If this function is not required, program 2400 in
Alarm 21
.
Alarm 31 Selections disabled for daily time periods:
This command allow the selections set at command “Alarm 36” to be disabled for 3 time periods per day. If
use of this function is not required, programme
2400 at
Alarm 31
.
Alarm 36 Setting the selections subject to time inhibition:
When the command is entered, the system requests disabling of the option which concerns the entire
machine (option 1), or no (option 0). If the setting is with option 0, the command makes it possible to select
which selections must be inhibited during the time periods in which the "selection inhibition" function is active
(see programming
Alarms 31
).
Содержание Easy 6000
Страница 1: ......
