Westgate DV48, Руководство пользователя

Страница: 46 / 60

S
TART
-U
P
& O
PERATION
Turn off the Appliance
Press the ON/OFF Key on the Transmitter. The Transmitter LCD display
will only show the room temperature and Icon (see Figure 113). A single
“beep” from the Receiver confirms reception of the command and both
the pilot light (if the unit is not set to continuous pilot) and main burner
will turn off.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control the comfort level in a
room. To activate this function, press the Thermostat Key (see Figure
108). The LCD display on the Transmitter will change to show that the
room thermostat is “ON” and the set temperature is now displayed (see
Figure 113). To adjust the set temperature, press the Up or Down Arrow
Keys until the desired set temperature is displayed on the LCD screen of the Transmitter.
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in accordance to the difference between the set
point temperature and the actual room temperatures. As the room temperature gets closer to the set point
the Smart Function will modulate the flame down. To activate this function, press the Thermostat Key (Figure
108) until the word “SMART” appears to the right of the temperature bulb graphic (Figure 114). To adjust the
set temperature, press the Up or Down Arrow Keys until the desired set temperature is displayed on the LCD
screen of the Transmitter.
Figure 113: Remote Control
Displays Set Temperature.
Remote Flame Control
The Proflame GTMF has six (6) flame levels. With
the system on, and the flame level at the maximum
in the appliance, pressing the Down Arrow Key once
will reduce the flame height by one step until the
flame is turned off. The Up Arrow Key will increase
the flame height each time it is pressed. If the Up
Arrow Key is pressed while the system is on but
the flame is off, the flame will come on in the high
position (refer to Figure 115). A single “beep” will
confirm reception of the command.
Remote Actuated Accent Lights
Figure 114: Remote Control’s Smart Flame Function.
The DV48 is shipped with two (2) firebox accent lights. They are connected to the auxiliary power outlet of the
Proflame Fan Control Module. The lights can be turned on or off using the Auxiliary function on your remote
control. Press the Mode Key on the remote control until the Auxiliary Function icon is highlighted. Pressing the
Up or Down arrow keys will turn the accent lights on or off. See Figure 116 for the AUX icon details. A single
“beep” will confirm the reception of the command.
Figure 115: Remote Control’s Flame Levels.
46