Westgate DV48, Руководство пользователя

Страница: 40 / 60

Figure 98: Rear & Left Porcelain Panels in Place. Figure 99: Top Porcelain Panel in Place.
40
4. Install the Left Firebox Liner Panel; it sits on the bottom front edge of the firebox (see Figure 98), a support
bracket at the lower rear of the firebox, and is held in by a retainer at the top of the firebox. Adjust the
panel retainers as required.
5. Install the Top Panel by placing it on top of the Rear Panel and behind the Left Panel (see Figure 99). Hold
it with one hand or have someone else hold it for you while you place the last panel. WARNING: If this
panel falls from this location it will possibly break or the paint work will become chipped.
Figure 100: Installing Left Burner Cover Support.
6. Place the Right Firebox Liner Panel in the
same manner used for the Left Panel. The
vertical edges of the left and right panels
should line up with the front edges of the
firebox sides. The side panels rest up against
the back panel and hold the top panel in
position.
7. Install the Left Burner Cover Support as
shown in Figure 100. This bracket is installed
using three (3) T-20 Torx screws supplied.
Install the Right Burner Cover Support Right
as you’ve done on the left side.
Figure 101: Permanent Magnet on Left Burner Cover
I
NSTALLATION
S
ET
-U
P
Figure 102: Slots in Back of Burner Cover.