background image

 

45618A 

Printed in Canada 

05-11-2018 

 

Faceplate backing plate installation 
AC01322 / 29" x 44" or AC01332 / 29" x 50" 

Bottom faceplate backing plate installation  
AC01321 / 44" x 6" or AC01333 / 50" x 6"  

Projection kit installation 
AC01323* / 2" or 4" 

 

 

-

 

Prior  to  the  installation  of  the  faceplate  backing  plate,  measure  the  projection  of  the  cast  iron 
faceplate to the front of the fireplace opening. This will determine its location on the convection 
air jacket of the insert.

 

 

 

-

 

If  the  projection  is  greater  than  0”,  a  projection  kit  AC01323  will  need  to  be  used  before  the 
installation of the cast iron faceplate.  See 

step 3

 

*Note  that  in  order  to  install  the  optional  projection  kit  AC01323,  one  of  the  optional  faceplate 
backing plate kit AC01322 or AC01332 must be purchased separately to secure the projection kit to 
it. 

 

 

Содержание AC01323

Страница 1: ...he projection of the cast iron faceplate to the front of the fireplace opening This will determine its location on the convection air jacket of the insert If the projection is greater than 0 a projection kit AC01323 will need to be used before the installation of the cast iron faceplate See step 3 Note that in order to install the optional projection kit AC01323 one of the optional faceplate backi...

Страница 2: ...nvection air jacket D with screws B The location of the predrilled holes in the convection air jacket are to identify the following projections 1 The cast iron faceplate has no projection 0 from the front of the fireplace finish 2 The cast iron faceplate has a 2 projection from the front of the fireplace finish 3 The cast iron faceplate has a 4 projection from the front of the fireplace finish To ...

Страница 3: ...lign the holes in the panel F with the inner holes of the brackets C and secure with two screws B Note If your installation requires the addition of a projection kit AC01323 go to step 3 Otherwise go to step 4 Step 3 Projection kit installation AC01323 2 or 4 For a 4 projection go directly to step 3 2 3 1 For a 2 projection Fold each part G H and J on the axis of the micro joints to separate them ...

Страница 4: ...oles inside the projection kit assembly with the corresponding holes on the faceplate backing plate and fasten with 6 screws B Step 4 Cast iron faceplate installation Finalize the positioning of the wood insert so that the faceplate backing plate leans against the fireplace s front finish Then refer to the manual supplied with your heater to install the cast iron components M using screws N pre in...

Отзывы: