3
Step 2: Faceplate backing plate installation
2.1.
Faceplate backing plate installation AC01322 and AC01332
-
Align the holes in the panel
(E)
with the outer holes of the brackets
(A)
and the outer hole of the
brackets
(C)
and secure with ten screws
(B)
.
2.2.
Bottom faceplate backing plate installation AC01321 and AC01333
-
Align the holes in the panel
(F)
with the inner holes of the brackets
(C)
and secure with two screws
(B)
.
Note:
If your installation requires the addition of a projection kit AC01323, go to
step 3
. Otherwise, go
to
step 4
.
Step 3: Projection kit installation AC01323 / 2" or 4"
For a 4" projection, go directly to step 3.2
3.1.
For a 2" projection:
-
Fold each part
(G)
,
(H)
and
(J)
on the axis of
the micro joints to separate them into two
2 " section.
-
Discard the top portion (grey) and keep the
bottom portion of each piece to complete
the assembly.
