Westfalia ZQJ3116, Инструкция по эксплуатации

Страница: 31 / 47

26
Assembling
2
3
4
5
1
Attention: Only place the V-belt at the same height of the pulleys. Never place
the V-belt on different sections!
3. Tension the V-belt again by pushing the motor in direction to the arrow until
the V-belt can be pressed up to approx. 1 cm in the middle. Re-tighten the
lock screws (79 and 82).
Spindle Speed subject to the V-belt Position:
Position 1: 2450 min
-1
Position 2: 1870 min
-1
Position 3: 1330 min
-1
Position 4: 790 min
-1
Position 5: 500 min
-1
4. Remove the V-belt if you do not use the radial drill press for long period of
time.
1 cm
D
Part 82
Part 54