LEONARDO PRO X
User manual
EN
18
e)
In the
8.0 WBUS CONFIG.
menu use the 'AutoConf.' command: press and hold
(ENTER) to enter settings
in edit mode. Press
(ENTER) again. Press the
(UP) key and "RUN" appears in the value field. By
holding down the
(UP) key, the auto-configuration of all peripherals connected to the device is
performed. Press and hold
(ENTER) to confirm.
f)
Using the
(UP) key move to menu
8.3 W-INVERTER.
Press
(ENTER) and hold to enter settings in edit
mode. Press
(ENTER) again. Use the
(DOWN) and
(UP) keys to select the
System Type 7 and set
the other parameters according to the desired configuration (see
A8
table in Appendix).
Press and hold
(ENTER) to confirm (additional information can be found in the next paragraph).
g)
By holding down the
(ESC) key, we return to menu 7.0. Using the
(UP) key return to the
7.4 SYSTEM
INFO
menu and set the U.I. Mode field to "Basic" as done in point a). Press and hold
(ENTER) to
confirm.
h)
Press and hold the
(ESC) key to return to HOME.
8.
Check the warning LEDs
4. INTEGRATED DISPLAY - WRD
Through the display it is possible to see information about the operation of the Leonardo PRO X and possibly make
changes to the various settings of the system
WARNING: for qualified personnel only
.
14
