LEONARDO PRO X
User manual
EN
4
Unpacking and inspections
Please remember that the packaging (cardboard, cellophane, staples, adhesive tape, straps, etc.) can cut and/or injure if
not handled with care. They should be removed with appropriate means and not left in the hands of irresponsible
persons (e.g. children).
The packaging components must be disposed of in accordance with the regulations in force in the country of
installation.
When opening the packaging, check the integrity of the equipment and check that all components are present.
If defects or deteriorations are found, suspend operations and contact the carrier, and promptly inform the Western
Service.
List of components provided
The following components are supplied in the packaging, which are necessary for the correct installation of the inverter:
Control meter P1 (can only
be installed on AC systems)
Current Sense: TA Sensor
CAN cable, length 2.5 m
Wall mounting bracket
Wall mounting dowels and
screws
Installation and user
manual
