UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
49
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
Packets/Bytes LAN
interfaces. Note: These counts include all queries received from the WAN or
sent to a LAN interface, so the received counts may not match the transmitted
counts if the rate of queries is not the same for both interfaces. Also, if multicast
streams are gong to more than one LAN interface, comparing LAN and WAN
counts may be impossible due to possible overlap in the LAN interface counts
(i.e., two LAN interfaces with the same stream will double count).
15.6
LAN Configuration
This section explains how to configure your Gateway’s LAN settings.
15.6.1
DHCP for Private LAN
The following screen will be displayed if you select
Configuration > LAN > DHCP
from the menu options. This
screen allows you to control how the Gateway interacts with local devices to which it is connected.
NOTE:
Westell recommends that you do not change these settings unless your service provider instructs you to do so.
To enable DHCP for Private LAN, do the following:
1.
Click the
Enable DHCP Server
check box (a check mark will appear in the box). Note: By factory default
this box will already contain a check mark.
2.
Enter the appropriate address values in the fields provided. (Refer to the following table for information
about the Private LAN settings.)
3.
Enter the desired lease time values.
4.
Click
Save
to save the settings.
