UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
47
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
15.5
IGMP Service
The following screen will be displayed if you select
Configuration > IGMP
from the menu options. This screen
enables you to configure the IGMP services for your Gateway. Enter the appropriate settings and then click
Save
Settings
to save the settings. To view the status of the settings, click
Show Status.
IGMP Service
Internet Group Management Protocol (IGMP) enables you to configure IGMP services for your Gateway.
Enabled
Factory Default = Enabled
When this box is checked, IGMP service will be activated.
To disable IGMP service, click to uncheck the box.
Use Secondary WAN
Factory Default = Enabled
When this box is checked, the Gateway will use the secondary WAN interface for
Multicast traffic. This applies only when PPPoE is configured as the Primary
WAN protocol and the Secondary WAN is enabled when configuring PPPoE.
General Query Interval
The Interval between general queries (30-180, in seconds).
Query Response Interval
The maximum response time for general queries (1-10 in seconds).
LAN Robustness Variable
The number of times to send a message (1-4) on the LAN, for reliability.
WAN Robustness Variable
The number of times to leave a message (1-4) on the WAN, for reliability.
Leave Repeat Interval
The interval between leave messages sent on a WAN (1-50, in tenths of a second).
Unsolicited Report Count
The number of unsolicited member reports (1-4) sent on a WAN when first
joining the group.
