UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
18
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
8.2
Confirming Your VDSL Sync
Your Gateway must first establish a VDSL sync with your service provider’s equipment in order to have Internet
access. To determine if your Gateway has established a VDSL sync, check the following:
•
At the front of the Gateway, check to see if the Gateway’s
VDSL
LED is solid green. Solid green indicates
that a VDSL sync has been established. (The
VDSL
LED may flash while the connection is being
established.)
•
At the
Connection
screen, check the VDSL Line Status. If the status displays
Down,
you do not have a
VDSL connection. If the
Rate Down/Rate Up
fields display numeric values, a VDSL sync has been
established, and the VDSL Line Status should display
Up
.
IMPORTANT:
Confirm that the VDSL Line Status displays
Up
before proceeding with the Gateway’s
configuration. If you do not have a VDSL sync, first check your physical connections (refer to section 6, “Installing
the Hardware,” if needed). Then, if the problem persists, contact your ISP for further instructions.
After you have confirmed that your VDSL Line Status is
UP
, proceed to section 8.3, “Setting Up Your Connection
Profile.”
NOTE:
If your Gateway has established a VDSL sync and if you are connecting via DHCP, follow the instructions
provided by your Internet service provider to connect to the Internet. However, if you are connecting to the Internet
via PPP, proceed to section 8.3 to set up your connection profile.
