![Westell 826010 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/westell/826010/826010_user-manual_959974022.webp)
UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
22
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
8.4
Establishing a WAN Connection
If you clicked
Save
(to save your connection profile) and then clicked
Back
in the preceding
Connection
screen, the
following
Enter Network Password
screen will be displayed. Type the default
User Name
(which is bellsouthtech)
and default
Password
(which is be11s0uth) into the fields provided. Click
OK
to continue.
IMPORTANT:
Notice the 1’s and the 0 used the network password. You must enter this network password before
you can establish a WAN Connection. Your Internet service provider will provide you with these values.
After you have entered your network name and password and clicked
OK
in the preceding screen, the following
Connection
screen will appear. At the
Connection
screen, confirm that the
WAN Connection
field displays
Up.
When
WAN Connection
displays
Up
, this means that you have established a PPP session with your Internet service
provider (ISP). If
WAN Connection
displays
Down,
ensure that the
VDSL Line Status
field displays
Up,
and then
click
Connect
to establish a PPP session with your ISP. After a PPP session has been established, the
WAN
Connection
field should display
UP.
(Note: The VDSL Line Status must be
Up
in order to establish WAN
connectivity.)
IMPORTANT:
Whenever the
WAN Connection
field displays
Down,
you do not have a PPP session established.
If your Gateway’s connection profile is set to “Always On” or “On Demand,” after a brief delay, the PPP session
will be established automatically and the
WAN Connection
field will display
Up.
If the connection setting is set to
“Manual,” you must click the
Connect
button to establish a PPP session. Once the PPP session has been established
(
WAN Connection
displays
UP
), you can proceed with your Gateway’s configuration.
(
Refer to the preceding
Edit
Connection
screen if you desire to change your connection settings.) The factory default connection setting is
“Always On.”
bellsouthtech
be11s0uth