UltraLine II VDSL– Draft 1
030-300237 Rev. A
8/8/06
030-300237 Rev. A
20
August 2006
User Guide
UltraLine II VDSL Gateway (Model 826010)
At the
Edit Connection
screen, complete the following steps to set up your connection profile:
1.
Type your
Connection Name,
Account ID
and
Account Password
in the fields provided. The Account
Password field will be masked with asterisks for security.
NOTE:
The Connection Name is the name that you will use for this connection profile. The Account ID
and Account Password are provided by your Internet service provider.
2.
At the field labeled
Connection
, select the connection type (Manual, On Demand, Always On) that you
want to associate this Connection Name. The factory default Connection Name is “MainPPP. The factory
default connection setting is “Always On.” You can change the default connection setting, if desired.
(Connection settings are explained in the following table.)
3.
Select the MRU Negotiation and LCP settings that you want to use for this connection. For details on these
settings, refer to the following table.
4.
Click
Save
to save any changes that you have made to this screen.
5.
Click
Back
to return to the main
Connection
screen.
NOTE:
If you click
Back
before you click
Save,
the previously saved settings will remain active, and any
recent changes that you have made to this screen will not take effect. You must click
Save
to save the settings.
