West Ocean
WS-604 Digital LED Clock User Guide V2
12
Moving forward, access to the LED clock (i.e. for remote
control or changing the settings) will be through the Local IP
address.
Optional: Access your clock through Static IP
If the clock is on a network with a lot of devices, it can be
annoying to look up the Local IP address assigned through
steps above when you need to access your clock remotely.
Because if the clock hasn't connected in a few days, its IP
address can be assigned to something else.
Utilizing a static IP address on your clock avoids any IP
address conflicts and provides more accurate geolocation
than a dynamic IP address. To configure static IP for your
clock manually, you will need to know:
•
Available IP address on your network
•
Gateway IP
•
Subnet Mask
You can find all this information on your computer and/or
router depending on the device and network you are using.
Once you obtain all this information,
•
go to “Wi-Fi Settings” on main menu, enter all
information on the loaded page
•
Check “Static IP”
•
Tap on SAVE and restart your Clock.
