WERKU WK400950, Оригинальное руководство пользователя

Страница: 2 / 48

English
ENG
ORIGINAL INSTRUCTIONS
2
CE DECLARATION CONFORMITY.
Werku
®
declares that the WK400950 jig saw is
in accordance with the following Directives and
Standards:
2006/42/EC
2014/30/EU
2014/35/EU
EN60745-1:2009+A11
EN60745-2-11:2010
EN60825-1:2007
EN55014-1:2006+A1+A2
EN55014-2:1997+A1+A2
EN61000-3-2:2014
EN61000-3-3:2013
La Coruña, 06/05/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power .......................................................... 800W
Class .................................................................. II
Protection index ........................................... IP20
Laser ............................. Class 2 / P <1 mW 650 nM
Speed rate .......................................... 0-3000 min-
1
Speeds .................................................................. 6
Stroke blade ................................................. 20 mm
Slope positions ...................................................... 4
Wood cutting capacity ................................ 100 mm
Metal cutting capacity .................................. 10 mm
Cutting degree ................................................... 45º
Net weight .................................................. 2.4 kg
Acoustic pressure LpA ...................... 88.47 dB(A)
Respective uncertainity KpA .................... 3 dB(A)
Acoustic pressure LwA ..................... 99.47 dB(A)
Respective uncertainity KwA .................... 3 dB(A)
Vibration Ah ...................................... 10.65 m/s²
Respective uncertainity Kh ..................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been
measured in accordance with a standard test method
and may be used for comparing one power tool with
another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning: vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the power tool is
used. Warning: identify safety measures to protect
the operator, based on an estimation of exposure in
the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear mouth and nose protection
Wear ear protection
Wear hand protection
Double insulation
European conformity
2002/96/CE directive
SAFETY INSTRUCTIONS.
This power tool is intended to function as a jig saw for
marble/stone. Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury. Keep all warnings and all instructions for future
reference. Accidents can be avoided in many cases
by recognizing a potentially hazardous situation
before it occurs and by observing appropriate safety
procedures. Operations, such as grinding, wire
brushing, polishing or sanding are not recommended
to be performed with this power tool. Operations for
which this power tool was not designed may create a
hazard and cause personal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and dark
areas invite accidents. Do not operate this power tool
near flammable materials. Sparks could ignite these
materials. Keep away from children and curious while
operating a power tool. Distractions can cause you to
lose control.Keep bystanders a safe distance away