Wenglor OPT2012, Руководство по эксплуатации

Страница: 14 / 25

14
EN
Designation Function
NPN/PNP Configuring the outputs
P
N
PnP
npn
The output is preset to PNP. Pressing the N key sets the output to push-pull. Press-
ing the N key again sets the output to NPN.
The respective circuit diagram indicates how the output is set:
PNP Push-pull NPN
pnp
PnP
npn
npn
NO/NC Configuring the outputs
NO/NC
NO
NC
no
Outputs can be set up as normally open or normally closed by pressing the NO
or the NC key. The respective circuit diagram is displayed.
ON Delay Adjusting ON Delay
ON Delay
+
−
ON Delay
10 ms
ON Delay can be set to a value within
a range of 10 to 10.000 ms by pressing
the + or the – key. If the value is set to “0 ms”
the function is deactivated.
OFF Delay Adjusting OFF Delay
OFF Delay
+
−
OFF Delay
10 ms
OFF Delay can be set to a value within a
range of 10 to 10.000 ms by pressing the
+ or the – key. If the value is set to “0 ms”
the function is deactivated.
OFF Delay is disabled if a impulse duration
has already been selected. If this is the case,
Impulse! appears at the control panel.
Object
OFF Delay
Output