31
Vertical Closures
To install vertical closures along front surface of the sound-isolation room,
proceed with the following steps:
1. Install 2 x 4" metal studs offset from the front surface of the wall panel sections
at the front of the room.
a. Apply two rows of self-adhesive foam gasket to the metal stud surface making contact
with the wall panel.
b. Position the metal studs 1-1/8" (29 mm) back from the front surface of the room.
c. Attach each metal stud to the room using #8-18 x ¾" self-drilling screws.
#8-18 x ¾"
Self-Drilling
Screws
2 x 4"
Metal
Studs
2 x 4"
Metal
Stud
2 x 4"
Metal
Stud
1-1/8" (29 mm)
Recessed from
Front Surface
Foam
Gasket
Rows
