15
Installation (continued)
Ceiling Frame Rail Beam Option
Larger rooms may require a ceiling frame rail beam to support the ceiling panels.
Check the layout plan drawing to determine if this is required and attach it as follows.
If it is not required, continue on with the assembly.
1. Position the beam according to the layout plan drawing.
2. Attach the beam to the top of the wall panels using a
3
/
8
" neoprene washer, a
5
/
16
" flat washer
and a
5
/
16
-18 x
3
/
4
" capscrew through each of the four pre-drilled holes in the beam and into
the matching rivet nut location on at the top of the wall panel.
Ceiling Frame
Rail Beam
5
/
16
-18 x ¾" Hex
Head Capscrew
5
/
16
" Flat Washer
3
/
8
" Neoprene Washer
Rivet Nut
Do not leave the ceiling frame
rail beam unattended until
after it is completely attached
to the wall panels.
!
WARNING
