Wellsys W9CT, Руководство по обслуживанию, Страница: 15 / 36

FLUSHING THE COMPLETE SYSTEM
During the following steps you should be checking for any leaks, loose fittings, hot
water, cold water and production rate. See next Section- Final inspection.
Sanitize the cold tank
It is strongly encouraged that all systems are sanitized using a mixture of Hydrogen Peroxide and
water prior to placing in the field. Please follow the follow steps to properly perform this important
step.
1. Remove the cold tank lid.
2. Using a mixture of Hydrogen Peroxide to water, spray the inside of the tank, lid, floats, and all
parts visible parts with a heavy mist of spray.
3. Using a clean towel or paper towel, wipe the Hydrogen Peroxide away from the surfaces.
4. Spray a light mist of spray again on all parts and put the lid back onto the unit.
5. Allow one tank full of water to full up and drain a single time.
6.
It is strongly encouraged to perform this step on each annual service call as well.
15