Welch Allyn CP 150, Руководство по обслуживанию

Страница: 36 / 133

4. Specify settings.
Setting Action/Description
DHCP Select or deselect DHCP. Select DCHP to auto-connect
through Ethernet. Deselect DHCP to manfully enter
settings.
Network IP address Touch and enter the IP address to manually set up
the device for Ethernet communications.
Subnet mask Touch and enter the Subnet mask.
Gateway IP address that routes packets to other networks. Touch
and enter the Gateway address.
DNS Server 1 IP address of a server running DNS services for locating
computers and services through user-friendly names.
Touch and enter the DNS Server address.
DNS Server 2 Touch and enter the DNS Server 2 address.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home screen, touch
Exit
.
Specify radio settings
Note
Your model might not contain all of these features.
Note
Radio features are enabled through hardware detection.
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter 6345 as the Advanced settings code .
d. Touch OK .
The General tab appears at the bottom of the screen and the Regional tab appears at
the top of the screen.
2. Touch the Network tab.
The Status tab appears at the top of the screen and the vertical Ethernet and Radio
tabs appear.
3. Touch the Radio tab to access WiFi and Radio settings.
4. Specify Radio Configuration settings.
Setting Action/Description
Enable radio Enable the radio for device communications. When
disabled, the radio is not available.
ESSID Identification name of an 80211 wireless network. Touch
and enter the service set identifier (SSID- the
name of the access point). Enter a maximum of 32
characters.
32 Settings CP 150 12-lead resting electrocardiograph