WM
6840
1
0
4
/2
021
MEDUCORE Standard
2
EN
89
4 Preparation
4.5 Using the charging station
4.5.1 Mounting the charging station on the wall
1. Position the charging station with its rear on a wall so that the
compartment for inserting the battery is facing the right or left-
hand side.
2. Screw the charging station firmly to the wall using 3 screws
and 3 plain washers (maximum screw-in depth 6 mm).
When doing so, please note: The screws must be firmly
tightened.
Result
The charging station is firmly attached to the wall.
4.5.2 Operating the charging station on a mobile
basis
1. Glue the rubber feet to the rear of the charging station.
2. Place the charging station with the rear on a level surface.
Result
The charging station is used on a mobile basis (e.g. as a desktop
device).
Risk of injury from incorrectly mounted charging station!
If a charging station is mounted incorrectly, the charging station
may come off the wall or the battery may fall out.
Position and attach the charging station correctly.
