Weidmuller IE-CS-2TX-1RS232/485, Руководство пользователя

Страница: 31 / 105

IE-CS(T)-2TX-xRS232/485 Web Console Configuration
5-6
Server name
Setting Factory Default Necessity
1 to 39 characters NP[model name]_[Serial No.] Optional
Web/Telnet Console
The Disable option for “Web console” and “Telnet console” is included for security reasons. In some cases, you
may want to disable one or both of these console utilities as an extra precaution to prevent unauthorized users
from accessing your IE-CS(T)-2TX-xRS232/485. The factory default for both “Web console” and “Telnet console
is
Enable .
Web console
Setting Factory Default Necessity
Enable or Disable Enable Required
Telnet console
Setting Factory Default Necessity
Enable or Disable Enable Required
ATTENTION
If you disable both the “Web console” and “Telnet console,” you can still use the SE-Converter Administrator
to configure the IE-CS(T)-2TX-xRS232/485 either locally or remotely over the network. Refer to Chapter 6
for more details.
Reset button protect
Setting Factory Default Necessity
No or Yes None Optional
NOTE: Select Yes to allow limited use of the Reset Button, this means that the "Reset to default"
button only works within a 60 seconds time frame. I.e., within 60 seconds after booting up, after
which the "Reset to default" button will be automatically disabled and will no longer work.
Network Settings
You must assign a valid IP address to the IE-CS(T)-2TX-xRS232/485 before the device can start operating
within your network. Your network system administrator should provide you with an IP address and related
settings for your network. The IP address must be unique within the network (otherwise the