IE-CS(T)-2TX-xRS232/485
Web Console Configuration
5-26
TCP alive check time
Setting
Factory Default
Necessity
0 to 99 min
7 min
Required
0 min: TCP connection is not closed due to an idle TCP connection.
1 to 99 min: The IE-CS(T)-2TX-xRS232/485 closes the TCP connection automatically if there is no TCP activity
for the given time.
Destination IP address
Setting
Factory Default
Necessity
IP address or Domain Name
(E.g., 192.168.1.1)
blank Optional
TCP port No.
4001
Required
The Pair Connection “Master” will contact the network host that has this IP address. Data will be transmitted
through the port No. (4001 by default). Note that you must configure the same TCP port No. for the device
server acting as the Pair Connection “Slave.”
Pair Connection Slave Mode
When you select
Pair Connection Slave Mode
for the Operation mode of one of the
IE-CS(T)-2TX-xRS232/485s this IE-CS(T)-2TX-xRS232/485 will be acting as a TCP server.
TCP alive check time
Setting
Factory Default
Necessity
0 to 99 min
7 min
Required
0 min: TCP connection is not closed due to an idle TCP connection.
1 to 99 min: The IE-CS(T)-2TX-xRS232/485 closes the TCP connection automatically if there is no TCP activity
for the given time.
Local TCP port
Setting
Factory Default
Necessity
TCP port No. (e.g.,
4001)
4001 Required
This Port No. must be the same port No. that you set up for the Pair Connection “Master” device server
