IE-CS(T)-2TX-xRS232/485 Initial IP Address Configuration
3-3
Telnet Console
Depending on how your computer and network are configured, you may find it convenient to use network
access to set up your IE-CS(T)-2TX-xRS232/485’s IP address. This can be done using Telnet.
ATTENTION
Figures in this chapter were generated using IE-CS-2TX-2RS232/485.
1.
From the Windows desktop, click on Start and then select
Run
.
2.
Type
telnet 192.168.1.110
(use the correct IP address if different from the default) in the
Open
text input
box, and then click
OK
.
3.
When the Telnet window opens, if you are prompted to input the
Console password
, input the password
and then press
Enter
.
Note that this page will only appear if the IE-CS(T)-2TX-xRS232/485 is password protected.
4.
Type
2
to select
Network settings
, and then press
Enter
.
