12
17
18
2
5
Attach at
this hole
Holes
19
44
112
17. Orient the Rail (5) with the holes on the side
shown. Attach the Rail to the Upright Base (2)
with an M10 x 106mm Bolt (19) and an M10
Nylon Locknut (112).
Do not overtighten the
Locknut; the Rail must be able to pivot
easily.
Tighten the Storage Knob (44) into the
Upright Base (2) and the Rail (5).
18
.
Orient the Seat (25) as shown. Attach the Seat to
the Seat Carriage (16) with four M6 x 16mm
Screws (108).
25
Wide
End
16
108
108
19. Press the Front Leg Foot (38) onto the Front Leg
(4).
Note: The front of the Front Leg Foot is
taller than the back of the Foot.
Attach the Front Leg (4) to the Rail (5) with four
M8 x 20mm Screws (95) and four M8 Washers
(152).
19
4
95
152
95
38
5
Front is
taller
152
