16
23. Attach the Weight Carriage Frame (18) to the
Weight Carriage Guides (21) with two M8 x 40mm
Bolts (136) and two M8 Nylon Locknuts (170).
Do
not tighten the Nylon Locknuts yet.
23
24. Attach the Weight Carriage Frame (18) to the
Center Upright (13) and the Top Frame (17) with
two M10 x 25mm Screws (128). Then, press a
75mm Square Inner Cap (95) into the Top Frame.
See step 21. Tighten the M10 Nylon Locknuts
(153). See step 23. Tighten the M8 Nylon
Locknuts (170).
24
18
18
13
95
128
17
136
170
21
25. Grease the top of the Right Adjustment Bracket
(24), and insert it into the Top Frame (17).
See
the inset drawing.
Orient two Bracket Retainers
(73) so that the teeth bend
upward,
and press
them onto the Right Adjustment Bracket.
Attach the Right Adjustment Bracket (24) to the
Top Frame (17) with an M10 x 30mm Screw
(134), an M10 Lock Washer (86), an M10 Large
Washer (171), and a Bushing Cap (88).
Do not
overtighten the Screw; the Right Adjustment
Bracket must pivot easily.
Attach the Left Adjustment Bracket (25) in the
same way.
25
134
171
86
24
25
Grease
17
24
88
73
