18
30. Attach a Barbell Adapter (102) to the Barbell
(113) with an M10 x 25mm Screw (128) and a
Large Washer (135). Then, press a 48mm x 3mm
Round Inner Cap (103) into the Barbell Adapter.
Attach the other Barbell Adapter (not shown)
in the same way.
30
102
135
128
103
29. Orient the Locking Bar (114) as shown. Hold the
Locking Bar between the left Barbell Carriage
(104) and the right Barbell Carriage (not shown).
Insert the Barbell (113) into the left Barbell
Carriage, the Locking Bar, and the right Barbell
Carriage.
Center the Barbell in the Barbell
Carriages.
Then, engage the Locking Bar into
slots in the Front Uprights (11).
29
114
113
104
11
31. Insert a Phillips screwdriver into the indicated
hole in a Swivel Bracket (31). Use the Phillips
screwdriver to tighten the Trunnion (70) and the
Swivel Bracket into the Top Frame (17).
Attach the other Swivel Bracket (not shown)
in the same way.
31
17
31
113
Hole
70
