17
26. Grease the bottom of the Right Adjustment
Bracket (24), and slide the Right Arm (23) onto
the Right Adjustment Bracket.
See the inset
drawing.
Orient two Bracket Retainers (73) so
that the teeth bend
downward,
and press them
onto the Right Adjustment Bracket.
Attach the Right Arm (23) to Right Adjustment
Bracket (24) with an M10 x 30mm Screw (134),
an M10 Lock Washer (86), an M10 Large Washer
(171), and a Bushing Cap (88).
Do not overtight-
en the Screw; the Right Arm must pivot easily.
Pull the Arm Knob (85), and engage it into a hole
in the Right Adjustment Bracket (24). Then, attach
an M6 x 15mm Bolt (144) to the Right Adjustment
Bracket with an Adjustment Bracket Bushing
(157) and an M6 Nylon Locknut (156).
Attach the Left Arm (22) to the Left
Adjustment Bracket (25) in the same way.
24
23
22
25
27. Identify the Right Arm Pad (89), which is labeled
with an “R.” Attach the Right Arm Pad to the Right
Arm (23) with two M6 x 16mm Screws (141).
Attach the Left Arm Pad (90) to the Left Arm
(22) in the same way.
141
89
90
22
23
28. Attach the Butterfly Backrest (69) to the Center
Upright (13) with two M6 x 90mm Screws (126)
and two M6 Washers (149).
28
126
126
149
149
13
69
26
134
86
88
171
85
156
157
144
Grease
27
73
24
