WEICHAI Baudouin PowerKit 12M33 Series, Руководство по эксплуатации и обслуживанию

Страница: 13 / 91

Safety
13
before welding (control cabinets,
electrical cabinets etc.).

Comply with all legal provisions in force
before conducting welding work.

Do not use open fires.

Make sure that the work will not affect
the on-board electrical and electronic
equipment.

Make sure that the automatic fire
suppression system is deactivated
before any welding or grinding work.

Make sure that there is sufficient
ventilation in the premises where
welding is to be carried out.
1.8 Electrical Risks

Electrical checks must be carried out
regularly.

Electric wiring must be kept in good
condition, properly positioned and
soundly attached.

All wires should be of the
recommended size.

Wires and cables must be protected by
a fuse or calibrated circuit breaker.

Do not short-circuit fuses and/or circuit
breakers.

The electrical circuit of the engine must
be isolated from the engine and
generator.

Ensure that the engine is grounded
correctly to prevent uncontrolled
electrical circuit paths which can cause
damage.

Insulation problems can cause short-
circuits or stray current. Stray current
can damage electrical and electronic
components, bushing or crankshaft
seating and may also cause ra-
dio-frequency disturbance.

The engine earth must be properly con-
nected to the chassis, as well as all the
flexible hoses.