Wegener UNITY500, Руководство пользователя

Страница: 44 / 56

Page 44 UNITY500
800001-01 Page 44 of 56
A.1.3.2 Carrier Status (Not Tracking)
Figure 8. Sample Carrier Status (Not Tracking) Report
CARRIER STATUS
Acquisition Mode FADE
RF In: (Shown if RF Switch is installed) 2
Carrier 12000.11 MHz
Data Rate 1.536 Mbps
FEC Rate 1/2
Tag Site 3
Program: 2
Time in Current Mode: 00:00:30
Acquisition Submode: GET CARRIER
Time in Current Submode: 00:00:30
Acquisition Difficulties 2 dB
No Tag 12
Wrong Tag: 3 / 12000.00 MHz
Wrong Header 23
Bypassing Tag
Table 12. Carrier Status (Not Tracking) Report Terms
Term Possible Output or Register Source
Acquisition Mode FADE, INSTALLATION, CARRIER SEARCH, or HEADER SEARCH. State of
acq.mode
RF In If RF Switch is installed, the current setting. Otherwise not shown.
Carrier freq_string(active_settings.carrier)
Data Rate data_rate_string(active_settings.data_rate)
FEC Rate Active_settings.fec_rate
Tag Site Current Tag Site
Program Active_setting program
Time In Current Mode time_string(timer.acq_mode)
Acquisition Sub-Mode GET CARRIER, GET MPEG, GET TAG, or GET COMPEL. State of acq.sub_mode.
Acquisition Difficulties “Acquisition Difficulties: None” is shown if all of the following four counters are zero.
No Tag * Number of times unit timed out in Get Tag sub-mode and was still tracking. {if non-
zero}
Wrong Tag * Number of times unit has seen a wrong tag in Get Tag sub-mode and the last one’s
value, if non-zero.
Wrong Header * Number of times unit has seen an invalid header in GET COMPEL sub-mode, if non-
zero.
Bypassing Tag Only shown if bypassing tags.
* These counters are cleared each time the unit enters Tracking mode.