manualshive.com logo in svg

Wegener UNITY500, Руководство пользователя

Поделиться
Скачать
Wegener UNITY500 Скачать руководство пользователя страница 33

UNITY 500

Page 33

Page 33 of 56

800001-01

SECTION 3

SEARCH  FUNCTIONS

3.1 

PERMS/TEMPS/SEARCHING & SETTINGS

The term “settings” is used throughout this document and includes the following  set of
parameters:

Table 7.  Settings Parameters for the UNITY500

Carrier

The downlink frequency specified in MHz with up to two decimal places.
This value’s absolute difference with the LNB LO frequency must be as
specified in main body of Product Spec.

Data_rate

Data rate is specified in Mbps with up to three decimal places. See main
body of Product Spec for range.

Fec_rate

The inner FEC code ratio and can have one of the values specified in the
main body of Product Spec.

Tag_site

Value of 0-15 specifying the carrier ID “tag”.  The tag is text representing
the downlink carrier frequency in MHz.  For multi-hop links, multiple tags
are embedded in the control stream and the selected value must correspond
to the 

particular

 downlink being received.

NOTE:  Tag site ‘15’ is a special entry.  It means “receive this carrier
without requiring a matching carrier ID.”

[program]

This is the Program number, the identifier for a Program within the received
Transport stream.  It must be a ‘*’ wildcard or a number between 1 to 65535
inclusive. If the ‘*’ wildcard is entered, the unit will select the first available
program in a program table contained with the Transport stream.

Содержание UNITY500

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды