Wegener UNITY500 Скачать руководство пользователя страница 41

Страница: 41 / 56

UNITY 500

Page 41

Page 41 of 56

800001-01

3 - Carrier Search

4 - No COMPEL

5 – (No COMPEL) Header Seek

6 – (No COMPEL) Header Search

time:

Time-out value in HH:MM:SS format. Minimum value is 00:00:00 and maximum

value is 00:00:30 for fade and 4660:20:15 for all others.

Timeout.

source

is set to

time.

See Section

3.3

(Page 35) for an explanation of timeouts.

SNR

alarm_level margin_offset

alarm_level

: Units of dB with range from 2.0 - 7.0 and can have one decimal place.

margin_offset:

Units of dB with range from 1.0 - x and can have one decimal place. Sum

of alarm_level and margin_level cannot exceed 12.0.

Sets SNR Alarm Level and Margin Offset accordingly.

TEMP

settings time

settings

See Section

3.1

time:

Length of insert in HH:MM:SS format. Valid range is 00:00:00 to 18:00:00.

Does temporary insert per

Table 8

(Page 34). Unit sets its temp settings to

settings

TEMPCH

location

time

location:

Value from 1 - 48 indicating location in settings table.

time:

Same as for TEMP.

Unit sets it temp settings to those retrieved from the settings table according to

location

See TEMP command.

UNMUTE

[source][source]

source:

Same as the MUTE command.

Identical to MUTE except specified services are unmuted.

A.1.2

Local Control Commands

[command]

command:

Any of the terminal command names (H, R, TEMP, etc.).

If an ‘H’ or any invalid command beginning with an 'H' is entered and

command

omitted

, the whole help screen will be displayed, consisting of a list of all

currently

available commands and a brief description of each listing. If an ‘H’ or any invalid
command beginning with an 'H' is entered and

command

is a valid User Command Name,

then detailed help for

command

is displayed.

Содержание UNITY500

























































Результаты поиска

Содержание UNITY500

Отзывы:

Бренды по названию

Популярные бренды

Wegener UNITY500, Руководство пользователя

Результаты поиска

Содержание UNITY500

Отзывы:

Бренды по названию

Популярные бренды