manualshive.com logo in svg

Wegener UNITY500, Руководство пользователя

Поделиться
Скачать
Wegener UNITY500 Скачать руководство пользователя страница 39

UNITY 500

Page 39

Page 39 of 56

800001-01

APPENDIX A

TERMINAL/MODEM MODE

A.1 

TERMINAL/MODEM COMMANDS

Commands listed in this section detail command syntax and action taken.  Commands consist of
a command field and a parameter field.  Each command field and parameter field is separated
from others by a space.  Optional parameters are indicated by square brackets, [ ], and
conditional parameters are indicated by braces, {}.

For example, COMMAND_NAME 

parameter1 {parameter2} [parameter3] 

indicates that

parameter1 

must be entered, 

parameter2

 entered only when a certain condition is met (certain

option is installed, etc.), and 

parameter3

 is optional.  Both commands and parameters may be

entered in upper or lower case; the interface is not case-sensitive.

Incorrect or incomplete commands result in "Invalid Command" being displayed at the terminal.
Parameter errors on User commands generate "Invalid 

parameter name

" where 

parameter name

is the name of the incorrectly entered parameter.

A.1.1 

Network-enabled Local Control Commands

These commands are allowed 

only if local control is enabled

 and are given in Section 

A.1.1

(Page 39).  Commands that are always functional are given in Section 

A.1.2

 (Page 41).

ABORT

Insert is terminated.  See TEMP command.

ADDS

 

location settings
location:

 Value from 1 - 48 indicating location in settings_table.

settings: See 

Perms/Temps/Searching & Settings Section 

3.1

 .

The 

settings

 are added to the settings_table at the specified location. Will also handle data

rate rounding as explained for PERM.

AUXDATA

 

[PID] [baud] [parity]

PID:

  Selects the PID 

(in hex)

 for the Transport packets carrying the desired data stream.

Must be ‘20’ to ‘1ffe’ inclusive.

baud:

  Selects the baud rate of the async data stream.  Normally 19200.

parity

:  Sets the parity for the data output.  Normally “None.”

Sets up the Aux Data serial port device.

DELS

 

location

location:

 Value from 1 - 48 indicating location in settings_table.

The entry in the settings table at the specified location is deleted.  Ignored if only one

entry in settings table.

Содержание UNITY500

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды