manualshive.com logo in svg

Wegener UNITY500, Руководство пользователя

Поделиться
Скачать
Wegener UNITY500 Скачать руководство пользователя страница 24

Page 24

UNITY500

800001-01

Page 24 of 56

2.5 

ON-SCREEN NETWORK E-MAIL

The network may, through the COMPEL network control system, send e-mail messages to the
video (OSD) screen.  The content, location, and duration of the messages are essentially under
control of the network.  The local user may neither move nor scroll through the messages.  If
necessary, a message may be cleared by the local user by either (1) power-cycling the unit, or (2)
pressing the <SELECT> front panel push-button to get a local control menu [See Section 

2.7.2

(Page 25)], and then exiting out of that menu.

2.6 

ON-SCREEN DISPLAY (OSD)

The OSD information is contained in a 14-line x 40-character display in the video output from
the receiver.  This output is viewed on a monitor connected to the video monitor output of the
receiver.  Turn it on by pressing either the SELECT or ENTER push-button on the front panel.
Remove the display by selecting EXIT from the Main Menu.  When a menu is first shown, the
cursor is always placed on its first action field (or action-with-edit field, whichever is first).

The OSD provides the following:

1.  Carrier Status,

2.  Signal Strength Monitoring,

3.  Serial Port device selection,

4.  Software Version, and

5.  The ability to make changes to unit settings.  See Section 

2.7

 (Page 25).

All menus are white text with a solid blue background. When highlighted, they show as blue text
on white background.  The cursor can be moved only to the fields listed below. The function of
each push button for each field type is described below.

Table 6.  OSD Fields

FIELD

SELECT

ENTER

Action Field

Moves cursor to next action field
(or action w/ edit field, which ever
is next). Wraps at end.

Takes action on the current field.

Action w/ Edit Field

Same as for action field.

Moves cursor to corresponding edit
field.

Edit Field

If cursor is not on last digit within
edit field, moves cursor to next
digit. Else, moves to next action
field (or action w/ edit field, which
ever is next)

Increments current digit within edit
field. Wraps back to beginning
after 9.

Edit Field w/ Choices

Moves cursor to next action field
(or action w/ edit field, which ever
is next).

Scrolls through list of choices.
Wraps back to beginning after last.

Содержание UNITY500

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды