Weco WF-104, Инструкция по эксплуатации, Страница: 61 / 96

WELD THE WORLD
Cod. 006.0001.0940
16/04/2018 V.2.25
WF-104
WF-108
61
ENGLISH
C
○ Use the encoder E3 , to select the DELETE function.
○ Press buttons
S5
and
S6
to select parameter
JOB
.
The JOB displayed is the one that was most recently used.
When there are no saved jobs the following message appears on the bottom line: NO JOB
○ Using the
encoder E3
, select one of the jobs displayed.
D
Exit without confirmation
○ Press the S4 button.
This action will automatically close the menu
Exit with confirmation
○ Press the S8 button.
The message “ CONFIRM JOB ERASURE ” appears on display D4.
○ Use the
encoder E3
, to select the
NO
function”
○ Press the S8 button.
This action will automatically close the menu
Exit with confirmation
○ Use the encoder E3 , to select the NO function”
○ Press the S8 button.
This action will automatically close the menu
11.5 EXPORTING/IMPORTING JOBs (through a USB memory stick)
By using a USB memory stick, the JOBs saved on the panel can be imported into another panel.
When a USB memory stick is connected, the JOB MENU will display the items related to the importing
and exporting procedure.
WARNING!
The JOBs are exported to the USB memory stick with the name of the location
where they are saved on the panel. If the file names of the JOBs saved onto the USB memory stick are
changed by using a PC, after they are imported into the destination panel, they will still be saved in their
original location . This means that, if the destination panel already contains JOBs saved in the same
location as those exported to the memory stick, they will be overwritten.
We recommend not to change the name of the files exported to the USB memory stick. The file
extension (.bin) must never be changed.
JOBs to be kept must be moved in a location of the destination panel different from the location
of the JOBs exported to the USB memory stick.
To be usable, the memory stick must be formatted as FAT32.