Weco WF-104, Инструкция по эксплуатации, Страница: 21 / 96

WELD THE WORLD
Cod. 006.0001.0940
16/04/2018 V.2.25
WF-104
WF-108
21
ENGLISH
NOTE: During the normal operation, the operator can enter the SET UP menu by pressing the key S7
for 5 seconds (SET UP can therefore be accessed with machine on).
Tab. 2 - Setup settings
MENU
PAGE
SETTING
MIN DEFAULT MAX NOTES
SET UP 1/10 SELECT LANGUAGE
ENGLISH
ITALIANO
FRANÇAIS
DEUTSCH
ESPAÑOL
PORTUGUES
DUTCH
CESKY
SRBSKI
POLSKI
SUOMI
SET UP 2/10 COOLING TYPE
ON AUTO AUTO
SET UP 3/10 DISPLAY CONTRAST
0 % 50 % 100 %
SET UP 4/10 CONTROL TYPE OFF OFF RC08
OFF No control
RC03 n°1 potentiometer
RC04 n°2 potentiometers
RC05 n°1 UP/DOWN
RC06 n°2 UP/DOWN
RC08
SET UP 5/10 LOCK STATUS OFF OFF LOCK 2
OFF All adjustments enabled.
LOCK 1 All adjustments are disabled
with the exceptions shown
in “Tab. 3 - Functions not
disabled by Locks” on page
25 .
LOCK 2
SET UP 6/10 ARC CORRECTION VOLTS VOLTS m/min
SET UP 7/10 HOUR COUNTER 0.0 h 0.0 h 0.0 h
SET UP 8/10 CONNECTION TYPE OFF OFF NC02
OFF
Communication with the IR
is disabled
NC01 Data is being sent to the IR
NC02
Data is being sent to and re-
ceived by the IR
SET UP 9/10 SERVICE
C U R -
R E N T
VAL.
C U R -
R E N T
VAL.
C A L I -
B R A -
TION
Access to the submenu of
the calibration and valida-
tion services
SET UP 10/10 PUSH-PULL OFF OFF ON
Cooler activation
- ON= The cooler is always running when the power source is switched on. This mode is preferable
for heavy duty and automatic welding procedures.
- OFF= The cooler is always disabled because an air-cooled torch is in use.
- AUT= When the unit is switched on the cooler is switched on for 15 s. During welding procedures
the cooler runs constantly. When welding is terminated the cooler continues to run for 90 s plus
a number of seconds equivalent to the average current value shown using the HOLD function.