www.weaverleathercraft.com
18
You do not need to pre-punch holes in your material to set staples.
To achieve the best results, we recommend testing a few staples
in some scrap leather.
FOR SETTING DECORATIVE STAPLES
WITH THE SPOT ANVIL
1) Insert the spot anvil into the anvil adapter and secure the anvil
with the set screw located at the front of the anvil adapter
using a 5/32" Allen wrench
(Figure 57)
. Insert the slide loop
staple setter attachment into the driver shaft and secure with
the thumb screw
(Figure 58)
.
2) It is important to obtain the proper distance between the anvil and
the driver. Turn clockwise to raise the driver or counterclockwise
to lower the driver
(Figure 59)
.
3) Place the staple into the setter
(Figure 60)
. The setter can be
rotated so you can set your staple at any angle to create a variety
of decorative patterns.
4) Insert leather or material that you are using.
5) Pull the handle forward until staple is set
(Figure 61)
.
FIGURE 57
SPOT
ANVIL
FIGURE 58
FIGURE 60
FIGURE 61
Setting 15S4 Slide Loop Staples
FIGURE 59
LOOP
ANVIL
