W'eau 15780, Руководство пользователя, Страница: 9 / 24

W’EAU HEATER MANUAL | 9
EN
MAINTENANCE
• This heater must never be submerged under water. It must always be installed
outside the water.
• The adjustable thermostat must never be opened. All guarantees
expire once the thermostat has been opened.
• The element may not be covered in lime scale or caked dirt.
• Prevent air getting into the system. If a part of the element is not covered with water, this section can
become overheated and cause the element to burn out.
INSTALLATION
• The Heater has 63 mm couplings for a glueable connection; glueable adapters to 50 mm are
provided. When using PVC tubing ensure that there is no strain on the connection to the frogs.
• Cut the tube connectors to the required length (or use the frogs) and twist these,
as well as the rubber sealing ring, into the 50 mm adapter by hand. Prevent
any damage by only using the connectors and frogs provided.
• Ensure that the apparatus never runs dry. For this reason, always ensure that the Heater
is installed horizontally, with the inlet and outlet on top. This ensures that there will
always be water in the apparatus, even if the pump should fall out accidentally.
• Connect the pump to the Heater and switch the pump on. Check the system
for flow and leakage. In case of leakage on the tube connectors, (never force
them!) use a piece of Teflon tape on the thread of the connection.
• Put the plug into the socket and set the thermostat to the desired temperature.
As soon as the set temperature has been reached, the light will go off.
ATTENTION: The adjustable thermostat is indicative. Always check the water temperature, using a second
temperature gauge when putting the Heater into operation and using the swimming pool. The water temperature
may differ from the temperature indicated on the thermostat. Measure several times after putting the device into
operation until the device switches off at the desired temperature.
GUARANTEE CONDITIONS
The product is guaranteed against manufacturing faults for 2 years from the date of purchase. No
guarantee can ever be given on the element burning out and causing a short. Guarantee claims can
only be handled if the product is returned post-paid and providing a valid proof of purchase
is included. Guarantee claims which are caused by installation or operating faults will not be recognised.
Defects arising from lack of maintenance do not fall under the guarantee. Guarantee repairs may
only be carried out by the supplier. The supplier can not be held liable for consequential
damage arising from failure, faulty maintenance or incorrect use of equipment. The guarantee will lapse if extra
facilities are added to the product or if changes are made to the product which are not part of the standard
equipment (for example the use of ‘third-party’ connectors, cutting off the plug or the drilling of extra holes).