Using the Session Manager
5000 Mobile Terminal Product Guide (5000-REV2.21)
Chapter 6-46
Host ID
The host identification entry links the MT unit to the 7000 Base Controller that connects to the desired
host. The chosen host ID must be the same as that assigned to the appropriate Base Controller. Any
session window can reference the same or different host ID used by another session window. The
default host ID is 0.
You can enter the host ID number via the
Host ID
menu item, which will pop up a numeric keyboard.
The entered ID will show in the menu item.
Data Bits
You can use the menu item
8 Bit=
to set the number of data bits per data byte to either 7 or 8. Touch
the menu item, which will pop up a keyboard, and enter
Yes
for 8 or
No
for 7. The default number is
8.
Yes
or
No
will show in the menu item.
DISPLAY SETTINGS
You can customize the display characteristics of a session window in terms of:
??
Page Caching
??
Character Set
??
Font
??
Font Map
??
Screen Size
??
Origin Scroll
You can access these customization options by selecting the
Display
menu item in the
Setup
menu.
Page Caching
You can set the number of pages for caching purposes via the
Page Caching
menu item which will pop
up a numeric keyboard. The entered number of pages will show in the menu item. The new value will
take effect upon rebooting the MT unit.
The default value is 0, which denotes that page caching is disabled.
Character Set
The MT unit can support one or more different character sets, depending on installation requirements
and available memory. The current available character sets are:
??
ASCII
