Setting Up
5000 Mobile Terminal Product Guide (5000-REV2.21)
Chapter 2-8
Restarting
The MT can be re-initialized via the touch screen by pressing the
<
2nd
>
key twice in rapid succession
followed by switching power OFF and then power ON in slower succession.
Upon restart, the terminal screen will be momentarily blurred while the operating system loads, the
terminal self-checks are performed, the hardware configurations are recognized, and the software start-
up sequence is initiated. The terminal will then display the Presentation Manager (P.M.) window and
the
WaveNet
logo. Touching any key on the overlay keypad will clear the logo and allow operation of
the terminal.
?
Do not rapidly cycle the DC power
ON/OFF switch
; this could disrupt touch screen
operation.