Using the Presentation Manager
5000 Mobile Terminal Product Guide (5000-REV2.21)
Chapter 4-28
Figure 4-2 Touching the UR Corner
?
The Upper Right (UR) and Lower Left (LL) correspond to the viewing screen not the
corner of the enclosure.
Using a Keyboard to Re-calibrate
Plug a standard keyboard into the port in the bottom of the unit. Press Alt+M to access the menu.
From there use the arrow keys to navigate the menu items and follow the procedure outlined in the
preceding paragraph – Using the Touch Screen to Re-calibrate.
Removing the Co-ordinate Window
The cursor co-ordinate window remains on the screen. To remove it Select ‘Touch’ in the Debug
Menu and then ‘Mode’ to exit. For capacitive units this completes the calibration procedure.
BARCODE TOGGLING
The bar code scanner may be toggled on or off at any time. The action of going from one state to the
other is known as ‘toggling’.
To use this feature select the Program Manager window and in it the Local Menu item.
From the Local menu select BarCode. A diamond will appear against it indicating selection.
