Chapter 4: Using the Remote Control Console
14
Send
UDP Requests
If the server will attempt to use UDP to request the device to connect.
UDP
How long to wait (in milliseconds) before the UDP connection request
times out.
SMS
How long to wait (in milliseconds) before the SMS connection request
times out.
Web Session
The length of time (in seconds) before the connection to the Remote
Control Console will time out.
VNC tab
Quality
The quality of the Remote Control display. This is on a scale of 1-100,
where 100 is the best quality and 1 is the worst quality.
Device Refresh
How often the device screen is refreshed during a Remote Control
session.
Viewer Refresh
How often the viewer screen is refreshed during a Remote Control
session.
Alt Server tab
Use Alternate
Server
Specifies that the Remote Control Console should be launched using a
local server address. This option only needs to be enabled when the
server address in the Client Settings is a publicly available IP address.
(For example, if the device is using a WWAN address.)
Server Address
Specifies the local Remote Control server address to use for launching
the Remote Control Console.
To configure server options from the Remote Control web page:
1
Launch the Remote Control Console using the username configured during installation.
2
Click
Server Setup
in the System Menu.
3
Configure the settings as needed.
4
Click
Save
.
Configuring Skin Settings for the Server
The Remote Control web page allows you to enable automatic skin synchronization, view
available skins, or download skins from the Wavelink server.
To enable automatic skin synchronization:
1
From the Remote Control Console, click
Skins
in the System Menu.