Peel from this end
49
Remo
ving a sensor
/
English
Once the session has stopped, you should remove the
sensor and place the transmitter in the charger.
See
CHAPTER 13
for details about removing your sensor.
/ 13
Removing a sensor
Once a session stops, you should remove the sensor and
place the transmitter in the charger.
CAUTION
•
The sensor is for single-use only, up to 14 days. Do not
reuse the sensor or use it beyond 14 days.
• Do not remove the transmitter while the sensor assem-
bly is attached to you.
1.
Remove the sensor adhesive patch, starting at the end closest to
the flat back side of the transmitter.
Peel the patch away from your body.
2.
After removal, fold back the si-
des of the sensor adhesive pa-
tch to cover the sensor.
3.
Pull back on the transmitter
release tab.
4.
Lift the transmitter away from
the sensor adhesive patch.
5.
Place the transmitter in the
charger.
Make sure the transmitter is ful-
ly charged before using it again.
See
SECTION 8.4
for details
about charging the transmitter.
6.
Discard the used sensor adhesi-
ve patch as medical waste.
CAUTION
Do not discard your transmitter.
