46
The cleat integrated into the bracket is used to lock the lowering and lifting line. For permanent
blocking in lower position, you can use the locking pin.
Please take care in pull in a vertical way on the immersion and lifting lines to avoid the cleat from
opening unexpectedly.
N.B. : When the hydrogenerator is submerged, the leg should sit flush in the
groove of the gudgeon provided for this purpose. If this is not the case, the lateral
support will be less efficient, and this may result in mechanical damage.
It is also advisable to hold the lifting end in place using an elastic cord to prevent it from leaving
the groove.
Lifting the hydrogenerator
