63
•
The hydrogenerator does not charge as much as is shown in the charts, why is this ?
The two most common causes of under
-
production are :
-
An electrical connection problem : poorly connected/assembled power socket,
damaged/corroded socket, cut or pinched cable.
-
The hydrogenerator is positioned along the axis of an appendage (rudder, keel, etc.)
which is disrupting the flow of water and affecting production.
-
We suggest that you consult the help centre on our website to check that your device
is operating correctly : http://www.wattandsea.com/help
-
center
•
Do the converter's LEDS consume energy ?
The converter has a residual consumption as one LED is always lit. It cuts out in the event of low
voltage (11.9V) in order to save the battery.
•
Ion lithium batteries ?
The converter is designed to charge lithium batteries as its voltage is regulated and cannot exceed
the maximum value of 14.3 V (or 28.6 V).
It can be programmed with specific voltages, through a computer or mobile application depending
on converter’s generation, please contact us.
•
Sailing in Sargassum?
The hydrogenerator is not designed to cross seas of sargassum. The drag induced by the Sargassum
could cause irreversible damage, it is recommended to raise the unit.
•
Is the propeller replaceable?
The propeller is simply removed using an M6 extraction screw, supplied in the pack (see chapter
4.5).
